Polyethylene Tubing (for general purpose or weak acids)
|
 |
Description: Low Dens. Polyeth. Tubing for general use or low aggressive fluids.
Operating temperatures ranging from –10 C° to +60 C°.
(See herebelow derating Temp. Table)
Supplied in 100 mts coils up to 16mm OD, or 50 mts coils for higher Diameters.
Colours: natural; Black. Upon request: red; yellow; green; blue
|
Operating Pressure- Diameters Table
Pressure derating factor versus temperature:
20° (100%) / 30°(83%) / 40°(72%) / 50°(64%) / 60°(57%)
Other diameters (higher or smaller) available upon request
|
Metric sizes
|
Inch sizes
|
Diam.
(mm)
|
Oper.Press.
20 C°(bar)
|
Bending Rad.(mm)
|
Nominal
|
Diam.
(mm)
|
Oper.Press.
20 C°(bar)
|
Bending Rad.(mm)
|
6 x 4
|
13
|
30
|
¼
|
6,35 x 4,35
|
12
|
30
|
8 x 6
|
9
|
40
|
|
|
|
|
10 x 8
|
7
|
60
|
3/8
|
9,5 x 6,35
|
13
|
50
|
12 x 10
|
6
|
80
|
½
|
12,7 x 9,5
|
9
|
65
|
16 x 12
|
9
|
100
|
5/8
|
16 x 12
|
9
|
100
|
PVDF Tubing / KYNAR® (for aggressive chemicals)
|

|
Description: Tubing KYNAR PVDF (Polyvinylidene fluoride) is strongly suitable with acid fluids
( Hydrocloric Acid or Sulphuric acid). It is a valid and cheaper alternative to Teflon PTFE.
Good aging resistance Good impermeability with gases.
Operating temperatures ranging from –20 C° to +80 C°.
(See herebelow derating Temp. Table)
Supplied in 100 mts coils up to 12mm OD, or 50 mts coils for higher Diameters.
Colours: natural; Black.
|
Operating Pressure- Diameters Table
Pressure derating factor versus temperature:
20° (100%) / 40°(75%) / 60°(60%) / 80° (50%)
Other diameters (higher or smaller) available upon request
|
Metric Sizes
|
Inch Sizes
|
Diam.
(mm)
|
Oper.Press
20 C°(bar)
|
Bending Rad.(mm)
|
Nominal
|
Diam.
(mm)
|
Oper.Press.
20 C°(bar)
|
Bending Rad.(mm)
|
6 x 4
|
33
|
35
|
¼
|
6,35 x 3,17
|
55
|
40
|
8 x 6
|
24
|
40
|
|
|
|
|
10 x 8
|
19
|
60
|
3/8
|
9,5 x 6,35
|
33
|
80
|
12 x 10
|
15
|
85
|
½
|
12,7 x 9,5
|
24
|
95
|
16 x 13
|
17
|
86
|
5/8
|
16 x 13
|
17
|
100
|
22 x 18
|
17
|
200
|
7/8
|
22 x 18
|
17
|
200
|
PTFE / PFA Tubing (Teflon) (for very aggressive fluids)
Suitable with double sleeve JACO fittings
|
 |
Description: Teflon PTFE (politetrafluoroeth.) is the most popular fluorine Polymer.
Has excellent resistance to acids and bases, even at higher temperatures.
Can work also at low Temp. up to -40 C°. . Inert to Oxygen, Ozone and UV Rays.
An antistatic version is specifically suitable in Textyle Industry or Painting (with powder).
Teflon FEP o PFA has great impermeability to most of gases and is transparent like glass.
Particularly suggested to get retractile coils even at high temperatures.
Operating Pressure- Diameters Table
Pressure derating factor versus temp: 20°(100%) / 50°(85%) / 100°(65%) /150° (50%)
Metric Sizes (PTFE)
|
Inch Sizes (PTFE)
|
Diam.
(mm)
|
Burst Press.
Bar 25°
|
Working Press.
Bar 25°
|
Bending Rad. mm
|
Nominal
|
Diam.
(mm)
|
Burst Press.
Bar 25
|
Working Press.
Bar 25°
|
Bending Rad. mm
|
6 x 4
|
40
|
13
|
36
|
1/8
|
3,20 x 1,5
|
100
|
30
|
12
|
8 x 6
|
30
|
10
|
64
|
1/4
|
6,35 x 4,35
|
60
|
20
|
40
|
1/4
|
6,35 x 3,18
|
90
|
30
|
30
|
10 x 8
|
24
|
8
|
100
|
3/8
|
9,5 x 6,35
|
60
|
20
|
60
|
12 x 10
|
20
|
7
|
144
|
1/2
|
12,7 x 9,5
|
40
|
13
|
100
|
16 x 14
|
15
|
5
|
256
|
5/8
|
Vedi 16 x 14 mm
|
|
19 x 16
|
25
|
8
|
240
|
3/4
|
3/4 x 5/8
|
Vedi 19 x 16mm
|
22 x 19
|
15
|
5
|
323
|
7/8
|
22 x 19
|
Vedi 22 x 19mm
|